X-ray Inspection system
COMPACT & HIGH-RESOLUTION
Benchtop Entry Model
- Max X-ray voltage : 60kV
- Focal spot size : 5μm
- Maximum monitor image magnification
125 times - Inspection area
2.5 × 2.8mm to 4.7 × 5.3mm
Features
Suitable for Small Parts
"precision μB 3200" is a benchtop entry-level X-ray inspection system.
The compact X-ray inspection system fits directly on the desk to use it anywhere at small factories or offices.
And, you can adjust the geometric magnification of the sample by raising or lowering the detector position.
Size of Stage, Shooting Range by the Movement
The "precision μB3200" is ideal for taking images of small circuit boards and small components. For example, the maximum monitor image magnification of 125 times, the inspection area is 2.5 mm × 2.8 mm, and the applicable shooting range is 150 mm × 200 mm.
Sample on the stage
Door open
Reasons of Compact
- Using exquisitely created high voltage power supply
- New design for longer life
- Short FOD
For the Safety
The X-ray leakage measurement we offer is conducted from all directions of each unit to confirm that it is less than 1μSv/hr before delivery.
It is the extremely low level that has no impact on the usage in daily lives.
Four features that enhance safety
- Interlock
- Auto-off
- Product status display LED
- Emergency stop button
Notification
Notifications to the public authorities (government offices, municipalities, etc.) in each country may be required for the installation of X-ray equipment. Please contact our sales representative if you need any necessary information.
X-Ray Shielding Technology
To ensure safe and reliable installation, we have carefully designed radiation shielding.
In general, lead used for shielding is a soft and easily deformed material, but by adopting a multi-layered structure combined with steel plates, it can be used for a long time without deformation of lead.
Easy Replacement
X-ray tube unit replacement steps
To replace the X-ray tube unit, remove the panels on the top and at the back side, and pull out the X-ray tube unit from the bottom part.
X-ray detector replacement
Slide off the detector attached on the top inside of the unit to replace it with new one.
Model
| Model | X-ray tube | Stage | |||
|---|---|---|---|---|---|
| Anode voltage | Anode current | Focal spot size | Perimetry field | Maximum monitor magnification | |
| precision µB3200 | 30 kV to 60 kV | 150 µA MAX | 5 µm | 2.5 mm × 2.8 mm to 4.7 mm × 5.3 mm | 125 times |
Functions
Brightness adjustment
The brightness of the X-ray images can be arranged by adjusting the gain value and tone curve. Also, the automatic adjustment is available.
Contrast adjustment
The contrast of the X-ray image can be adjusted by changing the gamma value and brightness range. The automatic adjustment is also available.
Specifications
Options
- -LF3
-
CE to be markedDigital Flat Panel High resolution detector detector Gradations 16,384 (14 bits) Resolution 3 million pixels Inspection area 3.0 mm × 5.2 mm to 5.8 mm × 10.3 mm Maximum monitor magnification 103 times Monitor size 27 inches
Accessories
- Power Cable
-
Power cables for the product, computer, and monitor are not supplied. Please select the appropriate cable for your operating environment and region (see the table below), or prepare your own.
AC Input Cable CABLE TYPE1 
125 V / 10 A CABLE TYPE8 125 V / 125 A CABLE TYPE3
European Standard supported
250 V / 10 A CABLE TYPE4
European Standard supported
250 V / 10 A
- Up and Down Stage
-
STG002: size 120 mm × 120 mm
STG056: size 120 mm × 140 mm
The stage helps you to raise its height, therefore, the sample can be closer to the X-ray camera for shooting, so you can take larger field images.
Applications
Sample Images
Printed circuit board
Tube voltage : 60 kV
Tube current : 150 μA
Monitor image magnification : 20 times
Printed circuit board – wire bonding
Tube voltage : 60 kV
Tube current : 150 μA
Monitor image magnification : 125 times
Printed circuit board – BGA
Tube voltage : 60 kV
Tube current : 150 μA
Monitor image magnification : 125 times
Fields and Applications of X-ray Radiography Non-Destructive Testing
- Pharmaceuticals and Cosmetics
- Tablets, Capsules, Catheters, Medical pouches, Foreign object in the face mask, Cosmetics
- Automobiles and Electric Vehicles
- Automotive components, Wire harness, Batteries, Molded plastic parts, Motor, Insert molded parts, Aluminum die casting, Sensor, Mating parts connection
- Electronics
- Ball grid array (BGA), Integrated circuit (IC) chip, Connectors, Capacitors, LED, Relays, Printed circuit board (PCB), AC adapter, Light bulbs filament, Electrical cable disconnects, Discharge traces of dielectric breakdown
- Advanced Materials
- Carbon-Fiber-Reinforced Polymers (CFRP), Insulation material, Carbon, Dissimilar material joint, Contamination in beryllium
- Precision Conponents
- Probe, Bearing, Mating of plastic parts, Spring position
- Creatures and Plants
- Laboratory rats, Seeds, Flowers, Shell, Bone, Insects, Rice
- Others
- Microscopic foreign matter contamination, Voids in welding, Plastic bottle, Sealing of cans
Download
If you are unable to download a file
Please try the following solution.
- Please press Ctrl+F5 to clear the cache of your web browser and try again.
- Please restart your web browser and log in again to try again.
- Please change your web browser to another browser and try again.
- Restart the computer and try again.
- Please try again on a different computer.
-
precision series Selection Guide
Date: 2023-08-09 Rev. 04
PDF (5,316 KB)
The account registration is necessary for downloading
-
precision series Selection Guide
Date: 2023-08-09 Rev. 04
PDF (5,316 KB)
In this website, we provide only the latest version of information including instruction manuals as of our products. Therefore, the newest versions of manuals on the website might be not same as the ones of products you purchased in the past.
