• TC series
  • TC series

TC series

Ultra-compact PCB Mountable High Voltage Power Supply

  • Max Voltage: 1kVdc to 2kVdc
  • Max Current: 0.7mA to 1.5mA
  • Max Power: 1.5W
  • Ultra compact
  • ul_certified mark
  • ce mark

The suitable power supply for bringing out the best in PMT

TC series is a masterpiece of high voltage power supply for photomultipliers through expertise and knowhow of Matsusada Precision with over 30 years of high voltage power supply manufacturing. The series featuring low noise and high stability ensures the highest performance of photomultipliers. The power supply is also ideal for MCP.

When it comes to "reducing noises" during the low-light measurement, it would be a quite burdensome for designers who have to "increase the measurement system". Designed for photomultipliers, TC series is the best solution to the problem, and the ultra-compact series also can minimize ripple noises caused by the power supply.

Features and Benefits

  • Ultra-compact, PCB mountable
  • Ultra-low ripple 5 mVp-p minimum (1kV output model)
  • Wide range of output voltage (available with continuously variable 0V output)
  • High-performance with an ultra-compact size
  • Variable with volume control or external control voltage
  • Enhanced Protection circuit (including continuous short circuit protection)
  • UL62368-1 approved
  • CE marking approved (Low Voltage Directive)

Models

Positive polarity output

Model Input Voltage [Vdc] Output Ripple [mVp-p] Safety standerds
Voltage [kV] Current [mA] Minimum Load [Ω] *
TC-1P-12 12 0 to +1 1.5 0.35 5 ul_certified mark ce mark
TC-1.5P-12 0 to +1.5 1 0.75 7 ul_certified mark ce mark
TC-2P-12 0 to +2 0.7 1.5 10 ul_certified mark ce mark
TC-1P-15 15 0 to +1 1.5 0.35 5 ul_certified mark ce mark
TC-1.5P-15 0 to +1.5 1 0.75 7 ul_certified mark ce mark
TC-2P-15 0 to +2 0.7 1.5 10 ul_certified mark ce mark

Negative polarity output

Model Input Voltage [Vdc] Output Ripple [mVp-p] Safety standerds
Voltage [kV] Current [mA] Minimum Load [Ω] *
TC-1N-12 12 0 to -1 1.5 0.35 5 ul_certified mark ce mark
TC-1.5N-12 0 to -1.5 1 0.75 7 ul_certified mark CE mark
TC-2N-12 0 to -2 0.7 1.5 10 ul_certified mark CE mark
TC-1N-15 15 0 to -1 1.5 0.35 5 ul_certified mark CE mark
TC-1.5N-15 0 to -1.5 1 0.75 7 ul_certified mark CE mark
TC-2N-15 0 to -2 0.7 1.5 10 ul_certified mark CE mark

* Rated output current cannot be drawn at low output voltage range (Output current x Minimum load). Use at larger than minimum load.

Note: The power supply is designed with adequate consideration for high voltage safety as an integrated power supply. Make sure to ground the case (Pin 4) for further safety when using.

Specifications

For details, download the datasheet below.

Options

LS: Remote HV ON/OFF

Enable to high voltage ON/OFF with contact signal.

When use open collector,
ON ≤ 0.3 V (Low)
OFF ≥ 2 V (High)

How to Order

Add LS to Model No.
Example:
TC-1.5N-15LS

Diagram

Connection Diagram

For details, download the datasheet below.

Dimensions

For details, download the datasheet below.

Download

The account registration is necessary for downloading

In this website, we provide only the latest version of information including instruction manuals as of our products. Therefore, the newest versions of manuals on the website might be not same as the ones of products you purchased in the past.

Please click here if you are not registered yet to our site.

Membership Registration (Free)

Please click here if you are already registered to our site.

Log in

High Voltage power supplies (Chassis Mount/PCB Mount)