Searching...

  • TA series | High Voltage power supply PCB Mount (On-board) | Matsusada Precision
  • TA series | High Voltage power supply PCB Mount (On-board) | Matsusada Precision

ULTRA-COMPACT PCB MOUNTABLE HIGH VOLTAGE POWER SUPPLY

  • Voltage range: 1kVdc to 2kVdc
  • Current: 0.7mA to 1.5mA
  • Low ripple
  • Small footprint, Space-saving
  • UL Recognized
  • ce mark

Bring out the maximum performance of photomultiplier tube with low noise

The TA series is a small footprint high voltage power supply for photomultiplier tubes through expertise. Matsusada Precision has Know-how with over 40 years of high voltage power supply manufacturing. The series featuring low noise and high stability ensures the highest performance of the photomultiplier tubes. The power supply is also ideal for MCP.

When it comes to "reducing noises" during the low-light measurement, it would be quite burdensome for designers to "increase the measurement system." Matsusada Precision designed the TA series for photomultiplier tubes power supply. It is the best solution to the problem, and the ultra-compact series can also minimize ripple noises caused by the power supply.

FEATURES AND BENEFITS

  • World’s smallest class, ultra small footprint PCB mount module
  • Ultra-low ripple 5 mVp-p minimum (1kV output model)
  • Wide range of output voltage (available with continuously variable 0 V output)
  • High-performance with an ultra-compact size
  • Variable with volume control or external control voltage
  • Enhanced Protection circuit (including continuous short circuit protection)
  • UL62368-1 approved
  • CE marking approved (Low Voltage Directive)

APPLICATIONS

Models

Positive polarity output
Model Output Ripple Input Voltage
[Vdc]		 Safety standards
Voltage [kVdc] Current Minimum Load
TA-1P-12 0 to +1 kV 1.5 mA 0.35 MΩ 5 mVp-p 12 V UL Recognized ce mark
TA-1P-15 15 V UL Recognized ce mark
TA-1.5P-12 0 to +1.5 kV 1 mA 0.75 MΩ 7 mVp-p 12 V UL Recognized ce mark
TA-1.5P-15 15 V UL Recognized ce mark
TA-2P-12 0 to +2 kV 0.7 mA 1.5 MΩ 10 mVp-p 12 V UL Recognized ce mark
TA-2P-15 15 V UL Recognized ce mark
Negative polarity output
Model Output Ripple Input Voltage
[Vdc]		 Safety standards
Voltage [kVdc] Current Minimum Load
TA-1N-12 0 to -1 kV 1.5 mA 0.35 MΩ 5 mVp-p 12 V UL Recognized ce mark
TA-1N-15 15 V UL Recognized ce mark
TA-1.5N-12 0 to -1.5 kV 1 mA 0.75 MΩ 7 mVp-p 12 V UL Recognized ce mark
TA-1.5N-15 15 V UL Recognized ce mark
TA-2N-12 0 to -2 kV 0.7 mA 1.5 MΩ 10 mVp-p 12 V UL Recognized ce mark
TA-2N-15 15 V UL Recognized ce mark

* Rated output current cannot be drawn at low output voltage range (Output current x Minimum load). Use at larger than minimum load.

Note: The power supply is designed with adequate consideration for high voltage safety as an integrated power supply. Make sure to ground the case (Pin 4) for further safety when using.

Specifications

For details, download the datasheet below.

Options

LS

Remote high voltage ON/OFF

Enable to high voltage ON/OFF with contact signal.
When use open collector,
ON ≤ 0.3 V (Low)
OFF ≥ 2 V (High)

How to Order

Add LS to Model No.
Example: TA-1P-12LS

Diagram

Connection Diagram

For details, download the datasheet below.

Dimensions

For details, download the datasheet below.

Download

The account registration is necessary for downloading

In this website, we provide only the latest version of information including instruction manuals as of our products. Therefore, the newest versions of manuals on the website might be not same as the ones of products you purchased in the past.

Please click here if you are not registered yet to our site.

Membership Registration (Free)

Please click here if you are already registered to our site.

Log in

Information on related articles in Technical Knowledge

Similar products

Products to be used in combination

High Voltage power supplies (Chassis mount/PCB mount)

Search for related to High Voltage power supplies (Chassis mount/PCB mount)

Category