Bomb detection systems are designed to prevent explosives and other dangerous materials from being brought into aircraft and other vehicles, as well as into buildings and facilities. There are liquid explosives and solid explosives, and for each there is a device to inspect. These include X-ray inspection, spectroscopic inspection, and neutron backscattering explosive detectors that detect explosives from gamma rays generated by neutron irradiation.

Recommended products

Matsusada Precision manufactures and sells the power supplies used in these explosive detection systems.

XPg series

XPg series

output voltage
0 to -160kV
output current
0 to 67mA
output power
0 to 4kW
X-ray Power Source (for Anode ground type)

High stability and low ripple power supply with floating AC filament supply

XKg series

XKg series

output voltage
0 to 160kV
output current
0 to 67mA
output power
0 to 4kW
X-ray Power Source (for Cathode ground type)

Positive X-ray power supply with filament supply and generates stable x-ray output

AU series

AU series

output voltage
0 to +120kV/-120kV
output current
0 to 2.2A
output power
0 to 2.2kW
Low profile and lightweight

Digital interface is available.Wide lineup of over 300 models, Various remote control and monitor functions

XRR series

XRR series

output voltage
0 to 50 kV
output current
0 to 1 mA
output power
0 to 50 W
X-ray Power Source for Cathode grounded X-ray tube

Compact 50W

XRT series

XRT series

output voltage
0 to 50 kV
output current
0 to 2 mA
output power
0 to 50 W
X-ray Power Source for Cathode grounded X-ray tube

Compact high power 50W

KS-R series

KS-R series

output voltage
0 to +20 kV/-20 kV
output current
0 to 0.1 mA
output power
0 to 2 W
High Voltage Power Supply for SEM and MASS

Output voltage, current monitor

KA-R series

KA-R series

output voltage
0 to +30 kV/-30 kV
output current
0 to 1 mA
output power
0 to 10 W
SEM and MASS Spectrometry High Voltage Power Supply

Output polarity changed by external signal

KM series

KM series

output voltage
0 to 1 kV
output power
0 to 20 mA
output current
0 to 10 W
High stability and low noise High Voltage power supplies

Ideal for SEM and MASS

K10 series

K10 series

output voltage
0 to 10kV
output power
0 to 10W
output current
0 to 10mA
Compact High Voltage module for SEM and MASS

Ultra compact size 70mm width