Thank You for Visiting Our Booth at the TECHNO-FRONTIER 2026 POWER SUPPLY JAPAN

Image of staff lined up at the Matsusada Precision booth

We sincerely thank you for taking the time from your busy schedules to visit our booth at the TECHNO-FRONTIER 2026 POWER SUPPLY JAPAN, held at Tokyo Big Sight (West Exhibition Halls) from Wednesday, July 15, 2026.

Thanks to the support of all our visitors, the exhibition was a resounding success. We truly appreciate the opportunity to discuss your requirements. If you have any questions regarding our products or solutions that were not fully addressed during the event, please feel free to contact us.

Our entire team remains dedicated to further enhancing our technical capabilities to continue meeting your expectations. We sincerely look forward to your continued support and patronage for many years to come.

TECHNO-FRONTIER 2026 POWER SUPPLY JAPAN: A Look at the Exhibition Hall_01

TECHNO-FRONTIER 2026 POWER SUPPLY JAPAN: A Look at the Exhibition Hall_02

TECHNO-FRONTIER 2026 POWER SUPPLY JAPAN: A Look at the Exhibition Hall_03

Exhibited Products

DC Power Supplies / AC Power Supplies

ULTRA SLIM DC POWER SUPPLY
[P4KF-80 series]

Voltage range: 16V to 320V/power: 80W Wide-Range

Ultra-Slim 35 mm width, weight of approx. 1.0 kg
Low-noise switching regulator, supports a wide range of outputs.

ULTRA-COMPACT 800W DC POWER SUPPLY
[PKTS series]

Voltage range: 40V to 900V/power: 800W Wide-Range

Variable range output up to 800W in ultra-slim 2-inch (51mm) wide chassis.

DRS Series | Benchtop AC Power Supplies | Matsusada Precision

Desktop AC Power Supply [DRS Series]

Output Power: 500 VA to 2000 VA / Output Frequency: 1 Hz to 550 Hz

A new type of regulated AC power supply that achieves multi-functionality and high power in an overwhelmingly compact size, combining the space-saving design and high-quality output required for experiments, evaluations, and cell production.

Electronic Loads / Battery Testers / Regenerative DC Power Supplies

Electronic Loads (DC Electronic Loads) | Matsusada Precision

Benchtop High-Speed Electronic Load

Achieves overwhelming miniaturization for space-saving installation.
*First public unveiling at this exhibition.

EGS Series | Electronic Loads (DC Electronic Loads) | Matsusada Precision

Compact DC Electronic Load [EGS Series]

Max. Voltage: 18 V to 60 V / Max. Power: 75 W

Ultra-thin 35 mm width design for space-saving and lightweight installation.
Ideal for simulated loads of DC/DC converters and cycle life testing of primary/secondary batteries and DC power supplies.

HIGHLY-FUNCTIONAL SMALL DC CHARGE-DISCHARGE POWER SUPPLY
[CD series]

Voltage: 5V to 35V/Power: 4W to 108W

Charge-discharge cycle testing of various rechargeable batteries from single cells to battery packs is possible with this single unit.

PBRM series | Bidirectional (Regenerative) DC Power supply | Matsusada Precision

REGENERATIVE DC POWER SUPPLY
[PBR series]

Voltage: 80 to 1500V/Power: 5 kW, 10 kW, and 15 kW

High-Power Density in a Compact 3U Form Factor: Up to 15 kW Output with 200-240 VAC Input

Bipolar Power Supplies / High-Voltage Amplifiers

High-Voltage Amplifiers | Matsusada Precision

High-Speed, Compact High-Voltage Amplifier

Built on over 50 years of specialized high-voltage expertise and cutting-edge technology, this new model achieves high speed and high voltage in a compact form factor.
*First public unveiling at this exhibition.

DOKF Series | Bipolar Power Supplies | Matsusada Precision

4-Quadrant High-Speed Bipolar Power Supply [DOKF Series]

Output Voltage: ±20 V to ±60 V / Response Speed: DC to 200 kHz

Supports a wide variety of tests with DC to 120 kHz high-speed response and sequence functions.
Versatile for broad applications, ranging from transient response testing to various evaluation tests.

High Voltage Power Supplies / Electrostatic Chuck Power Supplies

HARS series | Rack mount High Voltage Power Supplies

Rack Mount DC 0.5-3 kW Digital High Voltage Power Supply
[HARS series]

Voltage range: 1 kV to 120 kV/power: 0.5kW, 1kW, 2kW, 3kW

Reliable High-Voltage Power in a Space-Saving Design
Low Ripple Performance (0.05%p-p)

ELECTROSTATIC CHUCK POWER SUPPLY
[HECD series]

Voltage range: ±0.5 to ±7.5 kV / Current: 1 mA to 20 mA

Two-channel output type, Wafer Sensor adopted
Polarity reversal enables increased throughput with quick dechucking.

X-ray Inspection Systems / Fume Extractors

Benchtop X-ray CT Scanner [precision μB4500]

Tube Voltage: 90 kV / Focus Size: Microfocus X-ray

Despite its space-saving compact size, this system generates high-resolution 3D-CT scan data at high magnification. Easily and stably observe liquid or powder samples simply by placing them on the stage, making it ideal for evaluating diverse material samples.

Q211 | Fume Extractor / Deodorizer | Matsusada Precision

Fume Extractor [Q211]

Airflow: 2.3 m³/min

Powerfully extracts smoke generated during soldering work and purifies it using a high-performance 3-layer filter.
The compact design allows it to be installed under a workbench without getting in the way of soldering operations.