• RMO series | Rack mount holder | Matsusada Precision
  • RMO series | Rack mount holder | Matsusada Precision

Rack mount holder for Matsusada power supplies

Specially designed rack mount holder

RMO series is rack mount adapter for 19-inch rack which hold Matsusada Precision's table top power supplies and digital controllers.
Each model is dedicated design for installed units, therefore, no additional heat countermeasure is needed and offer easy installation.

Features and Benefits

  • Specially designed cooling system with no impact on device performance *1
  • One AC cable for forced cooling fan and power supply
  • 19-inch rack cabinet RAC series is available *2
  1. The suction temperature of the power supply shall be within the operating temperature.
    It is considered that the service life of unit could be shortened by half as the temperature increases by 10 degrees.
  2. For details, contact our sales representatives.

Models

  • * When all models put it away in a 19-inch rack, please establish the space more than 0.6 inches (1.5 mm) in the lower part for prevention of interference.
  • * When attaching the power supply to the RMO series, the installation screws of the plastic feet for the unit are used for mounting.
  • * As CO series has no plastic feet, use the attached screws for fixing.
Model Compatible model
(example)
Hight
[inch (mm)]
Accommodation
(example)
RMO-44H-HALF REKJVOLJ 1.73 (44) 2-unit
RMO-133H-RK*1 *5 5.22 (132.5) 10-unit
RMO-133H-RK2 *1 *2
RMO-133H-RK3 *1 *3 *4
RMO-133H-RK400*8 RK(400 W): 6-unit
RK (800 W): 3-unit
RK(1200 W): 2-unit
RMO-133H-DRJ *5 *8 3-unit (DRS1000:2-unit)
(DRS2000: Please consult our sales office.)
RMO133H-EPR*8 5-unit (84 mm wide)
2-unit (210 mm wide)
RMO-133H-CO CO 11-unit
RMO-150H-B *6 ES 5.87 (149) 6-unit (70 mm), 4-unit (105 mm)
3-unit (135 mm), 2-unit (210 mm)
RMO-150H-EJC EJC 2-unit
RMO-177H-R4G *1 *6 6.97 (177) 5-unit (84 mm)
2-unit (210 mm wide)
Model Compatible model
(example)
Hight
[inch (mm)]
Accommodation
(example)
RMO-88H*9 General 3.31(88) -
RMO-133H*9 General 5.22(132.5) -
  1. 115 Vac forced cooling fan is provided. {230 Vac forced cooling fan is available with option -L(230V)}. 3-pin 2.5 meters AC cable is attached. Although the design takes airflow into consideration, the actual temperature during operation shall be verified by the user.
  2. A single AC cable is attached to the model so that AC input lines of the power supplies and forced air cooling fans can be put together. (AC connecting harness is needed separately as the accessory.)
  3. A single AC cable is attached to the model so that AC input lines of the power supplies and forced air cooling fans can be put together. The model is also equipped with a POWER switch on the front panel, which enables turn on/off all the power of up to 10 units at once. (AC connecting harness is needed separately as the accessory.)
  4. Some blank panels may not be available depending on loading number of power supplies. Please contact the nearby sales office for details.
  5. Please note that DRJ and DRS series with handles exceed 5.24 inches (133 mm) in height. If the handles are unnecessary, select DRJ-LNh.
  6. Make 100mm or more room both on the top and bottom, or install a forced cooling system. Note that the RGJ series with handle exceeds 5.87 inches (149mm) in height.
  7. It is available as a compact charge/discharge system in combination with the EGD series and RK series DC power supply (in 400 W, 800 W, and 1200 W types). As for the number of units available in the combination, contact our sales staff.
  8. The product is also available for CO series in combination with applicable power supplies. For details, contact our sales representatives.
  9. For details about the available models, see the DXF diagram data.
    Regarding the information about the combination of the products, refer to the DXF diagram data on our website. As for the fanless designed power supplies (R4K, R4G, etc.) or electronic loads (EGS, etc.), the use of the product could have an adverse impact on the service life due to lacking sufficient space or no cooling fan. Please see each instruction manual for detailed information. In the meantime, if you have any questions about the product, feel free to contact us.

Specifications

For details, download the datasheet below.

Options

Option

-L(230V)

Input Voltage of power supplies and forced air-cooling fan to carry 200 acV to 240 Vac ±10% 50 Hz/60 Hz single phase

(RMO-133H-RK/RK2/RK3, RMO-177H-R4G)

Accessories

Blank panel

Panel to hide the clearance caused by mounting products less than accommodation on the rack mount holder. Depending on the kind or number of power supplies and controllers, the base of RMO series may sag a little bit. It will be lessened by equipped blank panel.

Panel height 1.73 inch (44 mm) type
Model Panel width
[inch (mm)]
Compatible holder
BPA-44H-212W 8.35 (212) RMO-44H-HALF*

* When using REKJ series or VOLJ series, please use this panel by all means.

Panel height 4.48 inch (124 mm) type
Model Panel width
[inch (mm)]
Compatible holder
BPA-124H-35W 1.38 (35) RMO-133H-RK, RMO-133H-RK2
RMO-133H-RK3*, RMO-133H-RK400
RMO-133H-DRJ, RMO-133H-EPR
RMO-133H-CO, RMO-177H-R4G
BPA-124H-70W 2.76 (70)
BPA-124H-84W 3.31 (84)
BPA-124H-105W 4.13 (105)
BPA-124H-140W 5.51 (140)
BPA-124H-210W 8.27 (210)

* Some blank panels may not be available depending on loading number of power supplies. Please contact nearby sales office for details.

Panel height 5.51 inch (140 mm) type
Model Panel width
[inch (mm)]
Compatible holder
BPA-140H-35W 1.38 (35) RMO-150H-B
BPA-140H-70W 2.76 (70) RMO-150H-B
BPA-140H-105W 4.13 (105) RMO-150H-B
BPA-140H-135W 5.31 (135) RMO-150H-B
BPA-140H-212W 8.35 (212) RMO-150H-B, RMO-150H-EJC

AC connecting Harness

Cable for supplying electrical power form rack mount adapter (RMO-133H-RK2/RK3) to power supply

Model
CABLE RM-80W TYPE
for RK-80, R4K-80 series, and EGS series (10 pcs/set)
CABLE RM-36W TYPE
for old type R4K-36 (the coupler: IEC 60320 C5 type) series (10 pcs/set)
CABLE RM-36W2 TYPE
for current R4K-36 (the coupler: IEC 60320 C13 type) series (10 pcs/set)

Mounting screw of CO (RMO-133HRK400)

The screws are provided for installing CO series, Matsusada Digital controller. (The mounting screws are available with up to 9 units in CO series.)

Dimensions

For details, download the datasheet below.

Download

The account registration is necessary for downloading

In this website, we provide only the latest version of information including instruction manuals as of our products. Therefore, the newest versions of manuals on the website might be not same as the ones of products you purchased in the past.

Please click here if you are not registered yet to our site.

Membership Registration (Free)

Please click here if you are already registered to our site.

Log in

Information on related articles in Technical Knowledge

Controller/Interface/Accessories

Search for related to Controller/Interface/Accessories