Discontinued
COMPACT AND HIGH VOLTAGE POWER SUPPLY MODULE WITH AC INPUT
- Voltage range: 1 kV to 5 kV
- Power: 300W
High-Voltage Power Supply Module with AC Input
The WG series is a compact, high-power, high-voltage power supply module featuring an AC input. It is designed for demanding applications such as Automatic Test Equipment (ATE), X-ray inspection systems, and capacitor charging. When combined with the digital controller CO series, remote control via LAN, USB, RS-232C, RS-485, or GPIB is supported.
FEATURES AND BENEFITS
- Compact and high power
- Remote control and output monitor
- CV (constant voltage) mode and CC (constant current) mode automatic crossover
- Full protection for output short circuit and arc
Applications
Models
Positive Polarity
| Model | Output | |
|---|---|---|
| Voltage | Current | |
| WG-1P300 | 0 to 1 kVdc | 0 to 300 mA |
| WG-1.5P200 | 0 to 1.5 kVdc | 0 to 200 mA |
| WG-2P150 | 0 to 2 kVdc | 0 to 150 mA |
| WG-3P100 | 0 to 3 kVdc | 0 to 100 mA |
| WG-5P60 | 0 to 5 kVdc | 0 to 60 mA |
Negative Polarity
| Model | Output | |
|---|---|---|
| Voltage | Current | |
| WG-1N300 | 0 to -1 kVdc | 0 to 300 mA |
| WG-1.5N200 | 0 to -1.5 kVdc | 0 to 200 mA |
| WG-2N150 | 0 to -2 kVdc | 0 to 150 mA |
| WG-3N100 | 0 to -3 kVdc | 0 to 100 mA |
| WG-5N60 | 0 to -5 kVdc | 0 to 60 mA |
Specifications
Options
- -LOc
Overcurrent Output Cutoff
- Automatically cuts off the output when an overcurrent condition is detected.
- -LSh
SHV Output Connector
- The standard output connector is replaced with an SHV receptacle. The included output cable is terminated with an SHV plug.
- -LW
Slow Start
- The output voltage ramps up to the set value approximately 10 seconds after the output is turned ON.
- -L(200V)
200 VAC Input
- Input voltage: 200 VAC ±10%, single-phase.
Digital remote control
LAN / USB / RS-232C / RS-485 / GPIB Control adapters
To remotely control this high-voltage power supply via LAN or USB, purchase both a digital converter (CO-HV) and an optical isolation adapter. The digital converter (CO-HV) converts the analog control signal of the high-voltage power supply into a digital optical signal. The optical isolation adapter converts interface signals such as LAN and USB to optical signals.
For details, check the CO / USB series for a digital converter (CO-HV) and optical isolation adapter.
- Optical isolation
- 16-bit (1/65535) high-resolution A/D converter
- Computer and PLC control capable
- Protection against discharge and surge
- Ideal for automation and labor-saving systems
Diagram
Connection diagram
Dimensions
Download
If you are unable to download a file
Please try the following solution.
- Please press Ctrl+F5 to clear the cache of your web browser and try again.
- Please restart your web browser and log in again to try again.
- Please change your web browser to another browser and try again.
- Restart the computer and try again.
- Please try again on a different computer.
-
WG series Datasheet (Discontinued)
Date: 2023-8-1 Rev.06
PDF (844 KB)
-
High Voltage Power Supply Modules Selection Guide
Date: 2026-01-28 rev 19
PDF (4,914 KB)
-
Safety and Usage of High voltage Power supply
Date: 2025-09-08 rev 04
PDF (602 KB)
Login Required
-
WG series Datasheet (Discontinued)
Date: 2023-8-1 Rev.06
PDF (844 KB)
-
High Voltage Power Supply Modules Selection Guide
Date: 2026-01-28 rev 19
PDF (4,914 KB)
-
Safety and Usage of High voltage Power supply
Date: 2025-09-08 rev 04
PDF (602 KB)
On this website, we provide only the latest versions of information and instruction manuals for our products. Therefore, the newest versions of manuals on the website may differ from those that came with products you purchased in the past.
