Searching...

  • XR series | X-ray power supply Module (Chassis Mount) | Matsusada Precision
  • XR series | X-ray power supply Module (Chassis Mount) | Matsusada Precision

X-ray Power Supply

  • Voltage range: 30 to 65 kV
  • Current: 0.77 to 2 mA
  • Power: 50 to 100 W
  • For cathode X-ray tube
  • Compact and High Power
  • CE marking
    (For some models)

X-ray Power Supply for grounded Cathode X-ray tubes

This compact module incorporates adjustable beam, bias and filament supplies for low power X-ray applications. High voltage and filament current ramp up linearly for fast starts. Constant emission current is adjustable from 0 to full output for precise emission control.

Features

  • For grounded Cathode X-ray Tubes
  • Compact High Power 50 W to 100 W
  • 0.05% Emission current regulation
  • Remote and local emission control
  • Adjustable filament current
  • Safety interlock
  • Overvoltage and short circuit protection.
  • CE certified for 50 W and 75 W of 50 kV model.

Applications

Compatible X-ray tube

  • VAREX: VF-50J, VF-50K, VF-60
  • Oxford
  • Kevex
  • RTW
  • Superior
  • Trufocus

Models

Model * Output Input
Voltage [kVdc] Current [mA] Power [W] Filament Supply Voltage [Vdc] Current [A]
XR-305-50-## 0 to +30 kV 1.67 mA 50 W 0.3 to 3.5 A, adjustable.
Compliance Voltage 4.5 Vdc
(9 W max)
24 V 4 A max
XR-505-50-## 0 to +50 kV 1 mA 50 W 4 A max
XR-505-75-## 1.5 mA 75 W 6 A max
XR-505-100-## 2 mA 100 W 8 A max
XR-605-60-## 0 to +60 kV 1 mA 60 W 4.8 A max
XR-655-50-## 0 to +65 kV 0.77 mA 50 W 4 A max

* Each product of XR is adjusted most suitably to each model of X-ray tube. According to the suitable X-ray tube, it is classified by a suffixed number to the model number. When ordering, please advise us the part number and manufacturer of the X-ray tube to be used. According suitable model to the X-ray tube is selected, and an appropriate part number is to be informed.

Specifications

For details, download the datasheet below.

Options

-LB
Bias Supply
0 to -300 V adjustable, output current 0.25 mA

How to Order

When ordering, add Option No. in the following order by alphabet, number to Model No.
Example: XR-505-50-01-LBGH

Accessories

Shielded High voltage output cable: flying lead (1.5 meters)

Part# CN-XR(1.5)
(When a connector of the suitable X-ray tube is required, please contact us.)

Digital remote control adapter

LAN / USB / RS-232C / RS-485 / GPIB Control

To remotely control this high-voltage power supply via LAN or USB, purchase both an digital converter (CO-HV) and optical isolation adapter. The digital converter (CO-HV) converts the analog control signal of the high-voltage power supply into a digital optical signal. The optical isolation adapter converts interface signals such as LAN and USB to optical signals.

For details, check the CO / USB series for a digital converter (CO-HV) and optical isolation adapter.

  • Optical isolation
  • 16-bit (1/65535) high-resolution A / D .
  • Computer and PLC controlled.
  • Protecting from discharge and surge.
  • Ideal for automation and labor-saving systems.
Refer to CO/USB series
CO/USB series | Digital controllers | Matsusada Precision

Diagram

Connection diagram

For details, download the XR series Instruction Manual below.

Dimensions

For details, download the datasheet below.

Download

The account registration is necessary for downloading

In this website, we provide only the latest version of information including instruction manuals as of our products. Therefore, the newest versions of manuals on the website might be not same as the ones of products you purchased in the past.

Please click here if you are not registered yet to our site.

Membership Registration (Free)

Please click here if you are already registered to our site.

Log in

High Voltage power supplies (Chassis mount/PCB mount)