• WG series | High Voltage power supply Module (Chassis Mount) | Matsusada Precision
  • WG series | High Voltage power supply Module (Chassis Mount) | Matsusada Precision

Compact and high voltage power supply module with AC input

  • Voltage range: 1kV to 5kV
  • Power: 300W

Compact & High Power, High Voltage power supply

WG Series is a compact and high voltage power supply module with AC input. It is best suited for Automatic test equipment (ATE), X-ray equipment and Capacitor Charging. With combination with digital controller CO series, control via LAN, USB, RS-232C, RS-485 or GRIP is available.

Features and Benefits

  • Compact and high power
  • Remote control and output monitor
  • CV (constant voltage) mode and CC (constant current) mode automatic crossover
  • Full protection for output short circuit and arc

Applications

Models

Positive Polarity

Model Output
Voltage Current
WG-1P300 0 to 1 kVdc 0 to 300 mA
WG-1.5P200 0 to 1.5 kVdc 0 to 200 mA
WG-2P150 0 to 2 kVdc 0 to 150 mA
WG-3P100 0 to 3 kVdc 0 to 100 mA
WG-5P60 0 to 5 kVdc 0 to 60 mA

Negative Polarity

Model Output
Voltage Current
WG-1N300 0 to -1 kVdc 0 to 300 mA
WG-1.5N200 0 to -1.5 kVdc 0 to 200 mA
WG-2N150 0 to -2 kVdc 0 to 150 mA
WG-3N100 0 to -3 kVdc 0 to 100 mA
WG-5N60 0 to -5 kVdc 0 to 60 mA

Specifications

For details, download the datasheet below.

Options

-LOc

Cut off the output when overcurrent

-LW

Slow start: around 10 seconds from remote switch ON to reach setting voltage.

-L(200V)

Input voltage 200 Vac ±10 %, single phase.

-LSh

SHV output connector

Output connector will be SHV receptacle type. And, assorted output cable will be the cable with SHV plug.

Digital remote control adapter

LAN / USB / RS-232C / RS-485 / GPIB Control

To remotely control this high-voltage power supply via LAN or USB, purchase both an digital converter (CO-HV) and optical isolation adapter. The digital converter (CO-HV) converts the analog control signal of the high-voltage power supply into a digital optical signal. The optical isolation adapter converts interface signals such as LAN and USB to optical signals.

For details, check the CO / USB series for a digital converter (CO-HV) and optical isolation adapter.

  • Optical isolation
  • 16-bit (1/65535) high-resolution A / D .
  • Computer and PLC controlled.
  • Protecting from discharge and surge.
  • Ideal for automation and labor-saving systems.
Refer to CO/USB series
CO/USB series | Digital controllers | Matsusada Precision

Diagram

Connection diagram

Contact us

Dimensions

For details, download the datasheet below.

Download

The account registration is necessary for downloading

In this website, we provide only the latest version of information including instruction manuals as of our products. Therefore, the newest versions of manuals on the website might be not same as the ones of products you purchased in the past.

Please click here if you are not registered yet to our site.

Membership Registration (Free)

Please click here if you are already registered to our site.

Log in

High Voltage power supplies (Chassis mount/PCB mount)