DC Power Supplies VDD series (Discontinued)

For details, download the datasheet below.

-LEt ^{*1 *2}

LAN Interface board

Enable digital control via LAN
Hub shall be required between VDD and computer when control multiple VDD.

-LGob ^{*1 *2}

Optical Interface board

With optical communication, isolation control is performed. As complete isolation is performed by means of optical fiber, this enables advance prevention of erroneous operation involved with transient phenomenon caused by surges, inductive lightning, external noise, etc.

• -LGob: Optical interface board + optical cable 2 meters
• -LGob(Fc5): Optical interface board + optical cable 5 meters
• -LGob(Fc10): Optical interface board + optical cable 10 meters
• -LGob(Fc20): Optical interface board + optical cable 20 meters
• -LGob(Fc40): Optical interface board + optical cable 40 meters

Select the optional optical interface board (-LGob) when using this DC power supply under the following conditions.

• Noisy environment including factories (Example: Motors or coils are used near power supplies and loads).
• Using with high voltage floating (more than 250 V)
• Installation distance of 2 meters or more between the DC power supply and a controller such as a computer, laptop, or Programmable Logic Controller (PLC).

Adapters (sold separately)

An adapter is required separately, when using the Adapter.
The following adapters are available according to the connection method between PC and sequencer.

Adapter for LAN: CO-E32

Total 32 units can be connected to one CO-E32.
LAN cable is not provided.

---

Adapter for USB: USB-OPT

Total 32 units can be connected to one USB-OPT.
USB cable is not provided.

---

Adapter for RS-232C (9 pin): CO-OPT2-9

Adapter for RS-232C (25 pin): CO-OPT2-25

Adapter for RS-485 (25 pin): CO-OPT4-25

Total 32 units can be connected.

---

Adapter for GPIB: CO-G32

Total 32 units can be connected to one CO-G32.
GPIB cable is not provided.

---

For details, refer to CO/USB series datasheet.

(B) Optical fiber cable
As of models with -LGob option, a two-meter cable is provided in each model. If you need a longer cable, please consult us from here.

-LUs1 ^{*1 *2}

USB interface board

Enable digital control via USB
USB hub shall be required between VDD and computer when control multiple VDD.

-L(Mc0.5), -L(Mc0.15) ^*2

Communication cable length change

Change length of CO-M cable to 0.5-meter and 0.15-meter long. (Only either can be selected.)

-L(400V)

Input voltage 400V

Please see models

For details, download the datasheet below.