Four-Quadrant Fast Response
Bipolar Power Amplifier
Compact High Speed Bipolar Power Supply
- Output Voltage:
0 to ±45V - Max output power: 240W
- Frequency bandwidth:
DC to 100kHz - DC bias
Four-quadrant bipolar power Amplifier which source and sink electric power
DHOP series is four-quadrant bipolar power supply which source and sink electric power. They can be used in 2-mode of a constant voltage (CV) or a constant current (CC). Thanks to the original design, a phenomenal lightweight and compact size power supply, which is 8.27 inches (210 mm) width, and weigh 7 kg has been achieved.
They are ultra-compact and high-speed, driving output proportional to the input waveform such as a sine wave, triangular wave, saw wave, and square wave. DHOP series is most appropriate for evaluation tests such as solar panels, the instruments driven by battery and the IC which control the battery.
Note: This product is not designed for charge and discharge of battery.
For battery charging and discharging applications, please refer to the Battery Cycle Tester product page.
Features and Benefits
- Response speed
- Newly developed DHOP series is the most appropriate for transient response tests with such high power and broad bandwidth.
- DC bias
- 10-turn potentiometer to be used for the output setting volume when used as the DC power supply and for the bias setting when used as AC power supply is equipped.
- DC output meter
- 3-digit digital meter displays the DC value of the output voltage and current.
- Compact & Lightweight
- For maximum compactness and lightweight, the DHOP series has been improved for a small footprint and easy carry.
- CV (constant voltage)/CC (constant current)
- A single switch selects between CV and CC modes.
- Four-quadrant action
- DHOP series can be used both as a high-speed response DC power supply and as an electronic load.
- Complete protective function
- Protective function against overvoltage/overcurrent and protective measures against output short-circuit are completely provided.
Applications
- Suitable to evaluate battery driven equipment to use as a simulated battery
- Inductive load such as coil and transformer
- Capacitive load like capacitor
- Various motor tests
- Voltage regulation tests for in-vehicle electrical component
- Evaluation test for solar panel related devices
- For surface treatment
Models
* Please consult with our sales office about the specifications except for the following list.
| Model | Maximum output | Frequency bandwidth (-3dB) | ||
|---|---|---|---|---|
| Voltage | Current | Power | ||
| DHOP20-12 | ±20 V | ±12 A | 240 W | CV mode: DC to 100 kHz CC mode: DC to 10 kHz |
| DHOP45-5 | ±45 V | ±5 A | 225 W | |
Notice of POWER switch changes
We inform you of the power switch changes on the front panel as in the diagram below for shipment from June, 2020.
| Before | After |
|---|---|
Push button switch  |
Rocker switch  |
Functions
Protections
Overvoltage protection (OVP)
DHOP series is equipped with overvoltage protection, which protects load by limiting voltage up to approx. 110% of the rated output voltage even at abnormal conditions.
Overcurrent protection (OCP)
DHOP series is also equipped with overcurrent protection, which protects power supplies and load by limiting current up to approx. 110% of the rated output current.
High speed overcurrent protection
DHOP series is provided with 2 types of overcurrent protection, high-speed overcurrent protection to limit the pulse current, and standard overcurrent protection to limit the static current.
The standard overcurrent protection limits the static current, responding at around 1 ms. Additional high-speed overcurrent protection can limit the pulse current of square waveforms or from capacitors at approx. 2 times more current of rating.
Output range
DHOP series is a bipolar power supply which can perform four quadrant operation. They can supply (source) and absorb (sink) current in the field of the drawing on the right.
CV/CC setting selection
Inputting voltage via Vcon-in enables the control of output voltage V when CV control is selected and output current A when CC control is selected.
| In CV mode | In CC mode | |
|---|---|---|
| Vcon | Output voltage | Output current |
| -10 V | -Rating | -Rating |
| 0 V | 0 V | 0 A |
| +10 V | +Rating | +Rating |
Use of BIAS
When the "BIAS ON/OFF switch" is flipped to ON, bias can be changed with the "BIAS setting dial." Bias of the voltage can be set when CV control is selected, and that of the current can be when CC control is selected.
| In CV mode | In CC mode | |
|---|---|---|
| Scale | Output voltage | Output current |
| 000 (ccw) | -Rating | -Rating |
| 500 | 0 V | 0 A |
| 1000 (cw) | +Rating | +Rating |
Specifications
Options
- -LD
Interlock
- -LN
Automatic output recovery (previous: no power failure protection)
- This option retains the output state when recovering from an input power interruption, such as an AC power switch ON/OFF or a power failure. Therefore, there is no need to reset the protection status by turning off the OUTPUT switch once.
Caution: If you turn on the power while the OUTPUT setting is ON, the output will be ON.
- -LS
External output ON/OFF
How to Order
When ordering, add Option No. in the following order by alphabet to Model No.
Example: DHOP45-5-LDNS
Accessories
Function Generator
AC Input Cable
| [Standard] | CABLE TYPE1 |  |
 |
125 V / 10 A | 2.5 meters Fixed length |
|---|---|---|---|---|---|
| [Sold separately] | CABLE TYPE3 | |
 |
250 V / 10 A | 2.5 meters Fixed length |
| [Sold separately] | CABLE TYPE4 | |
 |
250 V / 10 A | 2.5 meters Fixed length |
Dimensions
Download
If you are unable to download a file
Please try the following solution.
- Please press Ctrl+F5 to clear the cache of your web browser and try again.
- Please restart your web browser and log in again to try again.
- Please change your web browser to another browser and try again.
- Restart the computer and try again.
- Please try again on a different computer.
-
DHOP series Datasheet
Date: 2023-07-26 rev.12
PDF (1343 KB)
-
Bipolar Power Supplies Selection Guide Via External Signal input
Date: 2023-07-26 rev.05
PDF (5,471 KB)
-
Bipolar Power Supplies/Amplifiers Selection Guide
Date: 2023-10-17 rev.03
PDF (6,310 KB)
-
DHOP series Instruction Manual
Date: 2020-05-26 rev0.3
PDF (437 KB)
The account registration is necessary for downloading
-
DHOP series Datasheet
Date: 2023-07-26 rev.12
PDF (1343 KB)
-
Bipolar Power Supplies Selection Guide Via External Signal input
Date: 2023-07-26 rev.05
PDF (5,471 KB)
-
Bipolar Power Supplies/Amplifiers Selection Guide
Date: 2023-10-17 rev.03
PDF (6,310 KB)
-
DHOP series Instruction Manual
Date: 2020-05-26 rev0.3
PDF (437 KB)
In this website, we provide only the latest version of information including instruction manuals as of our products. Therefore, the newest versions of manuals on the website might be not same as the ones of products you purchased in the past.
