• eK-FGJ
  • eK-FGJ

eK-FGJ

Digital Function Generator

Fast output operation suited for even complex sequence patterns

  • Frequency range:
    0.01Hz to 1MHz
  • Maximum amplitude:
    20Vp-p (@1kΩ = RL)
    7.5Vp-p (@50Ω = RL)
  • Easy handling
  • Simple setting

Simple operation and high stability, the benefit of digital function generator

eK-FGJ is a function generator designed for realizing smaller and more user-friendly unit. Output value from the function generator can be converted and set based on our bipolar power supplies. Accordingly, eK-FGJ features the accurate and intuitive setting without calculating with the gain value.
We implemented the operability improvement by simple operation on 3.5-inch LCD screen. As you know, the function generator usually creates stable waveform with high accuracy.

Features

  • Designed for directly setting the output from bipolar power supplies produced by Matsusada.
  • High accuracy and stability features for signal creation
  • Intuitive operation and setting on LCD screen in a single unit
  • Sequence operation with control software
  • Easy operating exclusive control software as standard equipment

Model

Model
eK-FGJ

Functions

Matsusada as a leading power supply manufacturer introduced direct OUTPUT display

connect eK-FGJ to bipolar power supply, DOS6.5

* The picture shows an application example with DOS60-5.

If a different output is used instead of DC, 0 V and 0 A will be displayed since the unit is dedicated to displaying DC output in DOS series

software screen in amlitude setting

Output value from the function generator can be converted and set based on our bipolar power supplies.
Accordingly, eK-FGJ features the accurate and intuitive setting without calculating with the gain value.

The series offers the synchronous waveform output in two power supplies

connect eK-FGJ to two bipolar power supply with load

It is possible to apply the opposite synchronous waveform output by positive or negative toward motors or dielectric materials.

the opposite synchronous waveform

In the series, the synchronous output is available where the two waveforms follow the same patterns in terns of the respective cycle and sweeping start point. Besides, the phase shift is also available where one phase is shifted differing from the other.

Synchronous Output

It is designed to control the two waveforms by making them the same in terms of the cycles and the sweeping start point.

the two waveforms before scontrol
the two waveforms after control

Phase Shift

The output timing is arranged by moving the phase of your choice.

the two waveforms before control
one phase is shifted differing from the other

Appearance

eK-FGJ front panel

Screen Display

  1. Function: output waveform selecting (among the waveform items referring to "GENERAL SPECIFICATIONS")
  2. Frequency: frequency setting/setting value displaying
  3. Amplitude: amplitude setting/setting value displaying
  4. Offset: DC offsetting/setting value displaying
  5. Phase: setting of phase to start/setting value displaying
  6. Symmetry: symmetry setting/setting value displaying (in selecting triangle wave and square wave)

Key Operation

  • MEM: memory writing/read screen displaying
  • MODE: display switching/setting screen displaying
  • ← ↑ ↓ → :cursor movement
  • ENTER: to confirm your setting on the memory screen

Specifications

For details, download the datasheet below.

Software

Easy operating exclusive control software as standard equipment

Sequence Screen

The series features the independent sequence outputs with Ch1 and Ch2. Also, during the sequence operation, you can use the waveform made by a dedicated editor.
(As for the waveform of your choice, select one waveform that is commonly used in Ch1 and Ch2.)

Sequence Screen in control software

Optional Waveform Generation

Positive and negative outputs are available respectively. Wide varieties of waveforms are available by generating according to the composition methods.

* Concerning the configuration data used for the output, the reproduction may not always coincide with the actual output waveforms.

The series offers the composition consisting of a sine wave and an amplitude which have different patterns and readily provides the waveform generation.

Optional Waveform Generation in control software

The composition is also available by setting the specified range.

Optional Waveform Generation in control software

They can be added, subtracted, and multiplied.

Optional Waveform Generation in control software

Options

Optical Interface Board Option

In selecting this option, the USB board is not included as a standard specification.

  • -LGob: Optical interface board + optical cable 2 m
  • -LGob (Fc5): Optical interface board + optical cable 5 m
  • -LGob (Fc10): Optical interface board + optical cable 10 m
  • -LGob (Fc20): Optical interface board + optical cable 20 m
  • -LGob (Fc40): Optical interface board + optical cable 40 m

Isolation control is performed by optical communication. As complete isolation is performed by means of optical fiber, this enables the prevention of erroneous operation comprising transient phenomena caused by surges, inductive lightning, external noise, etc. (can be produced with the control software).
On the other hand, regarding the communication in this option, before the sequence operation is performed or the arbitrary waveform is outputted, it may take several seconds for the power supply to output following the signal output. If you plan to use the unit for such applications, it is not recommended to use this option.

In case the power supply is used under the following conditions, please include the option.

  • Noisy environment including factories (Example: Motors or coils are used near power supplies and loads.)
  • Use with high voltage floating (more than 250 V)
  • The installation distance between power supply and controller (PL or PLC) produced by Matsusada Precision is more than two meters

How to Order

To order, please add the above option codes to the model number.

[Sample]
eK-FGJ-LGob
eK-FGJ-LGob(Fc5)

Dimensions

For details, download the datasheet below.

Download

The account registration is necessary for downloading

In this website, we provide only the latest version of information including instruction manuals as of our products. Therefore, the newest versions of manuals on the website might be not same as the ones of products you purchased in the past.

Please click here if you are not registered yet to our site.

Membership Registration (Free)

Please click here if you are already registered to our site.

Log in

Information on related articles in Technical Knowledge

Products to be used in combination

Bipolar power supplies/High voltage Amplifiers

Search for related to Bipolar power supplies/High voltage Amplifiers