 |
 |
 |
![voltage[kv]](/high-voltage/images/idx_tbl2_voltage.gif) |
![current[ma]](/high-voltage/images/idx_tbl2_electric_power.gif) |

TA/TC Series | 0.2 to 2kV | 0.7 to 1.5W |
- Ultra-compact, PCB mountable
- Low ripple, 5 mVp-p (1 kV output type)
- Low noise with metal shielding
- Well-regulated, high performance
- External potentiometer or external control voltage programming
|

TF Series |
0.2 to 2kV |
0.7 to 1.5W |
- Ultra-compact, PCB mountable
- Low ripple, 30mVp-p
- Low Noise due to metal shielding
- Well-regulated, high performance
- External potentiometer or external control voltage programming
- Arc and continuous short circuit protection
|

TG Series |
0.2 to 2kV |
0.7 to 1.5W |
- The smallest ultra compact on-board module
- Low ripple, 5mVp-p(1kV output type)
- Wide output voltage range(Linearly variable from 0V)
- High performance in such a compact case
- External potentiometer or external control voltage programming
|

TM Series | 0.8 to 3kV | 1.5W |
- PCB mountableLow ripple, high stability, and well-regulated output
- Low Noise due to 6 -sided metal shielding
- A wide range of input voltage (+11 to +16 Vdc)
- External potentiometer or external control voltage programming
|

TD Series | 0.35 to 2kV | 5W |
- High power 5W for PMT
- Low ripple, high stability, and well-regulated output
- Low Noise due to 6 -sided metal shielding
- A wide range of input voltage
- External potentiometer or external control voltage programming
- Arc and continuous short circuit protection
|

TH Series | 1 to 2kV | 5W |
- Ultra-compact, PCB mountable
- Low ripple, 7 mVp-p (1 kV output type)
- Low Noise with metal shielded case
- Well-regulated, high performance
- Arc and continuous short circuit protection
- High power 5 W for PMT array
|

TE Series | 0.8 to 2kV |
4W |
- NRTL(UL1950), TUV, CE certified
- 4 W high power PCB mountable
- Low ripple, high stability, and well regulated output
- Low Noise with 6-sided shielding
- External potentiometer or external control voltage programming
|

TB Series | 2kV |
4W |
- Low ripple of 10mVp-p
- Low emission noise due to 6-sided shielding
- External potentiometer or external control voltage programming
|

TK Series | 1 to 2kV |
4W |
- 4 W high power PCB mountable
- Low ripple, high stability, and well regulated output
- Low Noise with 6-sided shielding
- Low Noise with 6-sided shielding
External potentiometer or external control voltage programming
|

TR Series |
50 to 800V |
1 to 0.5W |
- Built-in temperature compensation circuit
- +5 volt operation
- Low ripple noise
- Remote programmable
- Continuous output short circuit protected
|

TP series |
50 to 800V |
1 to 0.5W |
- Miniature size, PCB mountable
- Low ripple, < 10 mVp-p
- Output voltage controlled by remote control voltage
- Output short circuit protected
|

TJ series |
180V to 2kV |
2 to 3W |
- Compact and space saving design
- Low ripple noise of 20mVp-p
- Low emission noise with 5-sided shield
|

TS series | 50 to 300V |
1 to 0.5W |
- Miniature size, PCB mountable
- Low ripple, < 10 mVp-p
- Output voltage controlled by remote control voltage
- EMI/RFI shielded
- Continuous output short circuit protected
|

TY series | 150 to 300V |
1.5W |
- PCB mountable
- Low ripple, high stability,and well-regulated output
- A wide range of input voltage(+10 to +18 Vdc)
- Wide output voltage range (Linearly variable from 0V)
- Well-regulated,high performance
- External potentiometer or external control voltage programming
- Full protection
(over voltage, over current, input reverse connection)
- Long lifetime , high reliability
|

UR series | 0.3 to 6kV |
3W |
- Small Size PCB Mountable
- High Performance, low Ripple 0.2 % p-p
- Input/Output Proportional
- Input/Output Isolation (on Models up to 6 kV)
|

URG series |
0.3 to 6kV |
1.5W |
- Small Size PCB Mountable
- High Performance, low Ripple 0.2 % TYP
- Input/Output Proportional
- Input/Output Isolation
|

URS series | 0.3 to 6kV |
3W |
- Small Size PCB Mountable
- High Performance, low Ripple 0.2 % p-p
- Input/Output Proportional
- Input/Output Isolation (on Models up to 6 kV)
|

UP series | 100 to 500V |
2.5W |
- Miniature Size and High Power
- Low ripple, less than 0.5 %p-p
- Input/Output Proportional
- Input/Output Isolation (up to 500 V)
- UL60950, CSA No.60950 approved
|

URL Series |
0.3 to 6kV |
1.5W |
- Small Size PCB Mountable
- High Performance, low Ripple
- Input/Output Proportional
- Input/Output Isolation
|

URT Series |
0.3 to 2kV |
0.5W |
- Ultra compact on-board module
- High performance and low ripple 0.2%p-p (models up to 2kV)
- Input/Output proportional
- Input/Output isolation
|

RD series |
0.25 to 6kV |
30W |
- Ultra compact, High Power
- Ultra compact, High Power
- High reliability
- Both external VR or voltage for control
- -LP option(plastic case)
|
 |
 |
 |
 |
 |

RA/RB series | 0.3 to 30kV |
5 to 60W |
- Low Cost, High Reliability
- Fully Encapsulated
- External Voltage and Potentiometer Programmable
- Protected against arc & short circuit
- Output Voltage and current monitor
|

RC series | 0.3 to 30kV |
125W
250W |
- Max 250W is a compact high power high voltage power supply for integration.
- Consistent low noise with high stability even though it is the high power model.
- You are able to control unit via external potentiometer or external voltage.
|

KA series |
0.5 to 30kV |
10W |
- Ideal for SEM and MASS
- High stability 0.001%/5min
- Ultra low noise 0.001%p-p
|

K30 series |
±1.8kV |
36W |
- Compact and high power of 36W
- Ultra low ripple noise 30mVp-p
- High stability 100ppm/Hr
|

S series | 0.6 to 30kV |
1.5 to 30W |
- Well Regulated, Low Ripple
- High Reliability
- Fully Encapsulated
- External Voltage and Potentiometer Programmable
- Protected against arc & short circuit
|

WA series | 1 to 40kV |
300W,600W |
- Compact and high power
- World wide input and power factor correction circuit
- Remote control and monitor output as standard function
- CV/CC Automatic crossover
- Full protection for output short circuit and arc discharge
- Broad lineup from 1kV to 40kV,300W/600W output
|

JB series | 0.6 to 2kV |
2W |
- Exceptional low ripple and high stability
- Remote voltage and resistance programmable Fully protected against continuous short circuit Optional output connector
- TUV(EN 60950) and CE certified
|

J4/J6 series | 0.5 to 5kV |
2 to 6W |
- Exceptional low ripple and high stability
- Remote and local programming
- Fully protected against continuous short circuit
- Optional output connector
- UL1950, TUV, CE certified
|

K30 series |
±1.8kV |
36W |
- Compact and high power of 36W
- Ultra low ripple noise 30mVp-p
- High stability 100ppm/Hr
|

K3-R series | 1 to 30kV |
3 to 7W |
- Ultra low ripple 0.001% p-p
- High stability 0.001%/5 min
- Reverse polarity control
- Constant Voltage control
- Output Voltage monitor
|

K12-R series |
1 to 30kV |
3 to 7W |
- Ultra low ripple
- High stability 0.001%/5 min
- Reverse polarity control
- Constant Voltage
- Output Voltage/Current monitor
|

U series |
0.3 to 25kV |
2 to 12W |
- Input/Output Proportional
- Low Cost, Low Ripple
- Floating Output (up to 6 kV units)
- R.F.I. Shielding, Miniature Case
- Exceptional Long term Reliability
|

W series | 0.5 to 40kV |
120 to 350W |
- Small design
- Remote programming and monitoring
- Constant Voltage/Constant Current
- High Efficiency
- Short circuit and Arc protected
|

SC series | 1.5 to 10kV |
0.15 to 6W |
- Compact module
- High accuracy, stability, low noise
- Remote on/off
- Output current monitor
- Over voltage protection
|

AP/AS series | ±0.3kV to ±3kV |
30W |
- Output ±300 V to ±3 kV
- High speed response
- All solid state
- Various types of output wave forms according to the input wave
- Small Design
|

MEC series | 1 to 10kV |
10W |
- Specially designed for Electrostatic Chuck applications
- Smooth release of wafer with polarity reverse function
- Polarity change and output voltage control with remote signal
- Output Voltage and Current monitor
|

XR series | 50 to 65kV |
50 to 100W |
- For grounded Cathode X-ray Tubes
- Conpact High Power 50 W to 100 W
- 0.05% Emission current regulation
- Remote and local emission control
- Adjustable filament current
|

XRR series | 50kV |
100W |
- For Grounded Cathord X-ray Tubes
- 0.05% Emission Current regulation
- Adjustable filament current
- Safety interlock
- Overvoltage and short circuit protection
|

XRT series | 50kV |
50W |
- Output power 50W(25kV/2mA,50kV/1mA)
- For grounded Cathode X-ray Tubes
- Long life time with all solid-state components
- Adjustable filament current.
- Overvoltage and short circuit protection.
- Fillament protection at low anode voltage
- Door switch
|

XPgM/XKgM series | 50 to 70kV |
300W 600W |
- For grounded Cathode X-ray Tubes and grounded Anode X-ray Tubes
- Compact and High power
- Low ripple and high stability
- Digital interface
- High reliability
|

HPMS series | -1 to -2.7kV |
0.02 to 0.54W |
- For 28 mm (1-1/8 in.) side-on PMT
- Socket with built-in H.V. Power Supply and voltage divider
- Compact, easy operation
- HV output controlled by external voltage control
|

KA-R series | 10 to 30kV |
7.5 to 10W |
- Designed for SEM·MASS applications
- High Stability 0.001%/5min
- Ultra Low ripple noise
- Output polarity change by external signal
- Output voltage, current monitor
|

KS-R series | 10 to 20kV |
1 to 2W |
- Designed for SEM·MASS applications
- High Stability 0.1%/Hr
- Ultra Low ripple noise
- Quick output polarity change by external signal
- Output voltage, current monitor
|

K10 series |
1 to 10kV |
10W |
- High stability of 0.001%/5min
- Ultra low ripple noise of 0.001%p-p
- Ultra compact size of 2.76 inches (70mm) width
- Higher output power of 10W. Continuous operation is possible without derating.
|

SEM series |
*** |
*** |
- Three electron beam outputs for SEM are integrated in one case
- High stability, low ripple noise
- Over current protection
- Short circuit protection
|

FDC60 series |
*** |
*** |
- Floating filament power supply
- The isolation voltage is as 30kV in such a compact size.
- Constant current control with external control signal
|
 |
 |
 |
 |
 |

ES series | 1 to 5kV |
3 to 15W |
- Low ripple, High Stability
- Compact bench top units
- Reversible polarity available
- 1 kV to 5 kV, 6 W and 15 W
- Remote analog programmable (option)
|

EJ series | ±1 to ±2kV |
200W |
- Output polarity reversible type
- Output polarity change by a switch on front panel
- Polarity is changeable while HV is on
- Suitable model for voltage withstanding test for diodes, power semiconductors, etc and for anodic bonding application
- Compact and handy size
|

AMJ series | 0.5 to 4kV |
40W |
- Ultra compact
- High speed response 70kHz max
- Various types of output wave forms according to the input wave
- DC bias function
- DC output voltage monitor
|

EJC series | ±1 to ±5kV |
6 to 30W |
- Specially designed for Electrostatic Chuck applications
- Fast response (10 ms) with electronically polarity change
- Bi-polar output
- Integrated RF filter (optional)
- Long life and high reliability with no relay
|

CZE Series | 30kV |
7.5W |
- Polarity switchable type
- CV/CC control
- High stability and low noise output
- Ultra compact handy design
- Accurate digital meter
|

ECU series | 0.5 to 4kV |
3 to 8W |
- Designed for Electro Static Chuck (E-chuck) and ,2 outputs type
- Output reversible and forced discharge function for smooth release.
- RF filter integrated
- Local,Remote or RS-232C control
|

EQ series | 1 to 30kV |
30W |
- Low ripple, High Stability
- Compact bench top units
- 30 kV , 30 W
- Digital interface of GPIB,RS-232C,RS-485,USB(option)
- Over voltage and over current protection.
|

EP series | +2V, -2V |
4W |
- Power supplies for preamplifier are integrated (±15V and ±5V output)./li>
- Low ripple 15mVp-p (HV output part)
- Ultra compact design
- Large and noticeable 4-digit digital meter
- Full protections
|
 |
 |
 |
 |
 |

AU series | 1 to 120kV |
30 to 2200W |
- Wide output range from 1 kV to 120 kV and 30 W to 1.2 kW
- Low profile and lightweight
- Local and remote operation
- Front panel adjustable overload trip level
- Remote and front panel monitoring of DC output voltage and current
|

AF/AE series | 1 to 150kV |
10 to 300W |
- Low ripple 10 ppm, High stability 50 ppm/Hr. (AE Series)
- Wide line-up of high voltage power supply from 1 kV to 150 kV and 30 W to 300 W
- Local and remote operation
- Front panel adjustable overload trip level
- Remote and front panel monitoring of DC output voltage and current
|

ASX series | 3.1kV |
15W |
- Ultra low ripple
- Excellent stability
- GP-IB interface (optional)
- Compact 3 1/2 inch rack
- Rotary encoded controls (with back-up memory)
|

AES/AESS series | 5 to 30kV |
15 to 30W |
- Ultra Low Ripple and High stability
- Low temperature coefficient, 25ppm/°c<AESS> (Below 10ppm/°c model is available)
- With Voltage and current monitor
- RS-232C control, RS-485, RS422, GPIB and USB
|

AMP series | ±0.4 to ±20kV |
100 to 1200W |
- Output ±10 kV
- High speed response 700 V/µsec
- Peak current 30 mA max (within 10 mArms)
- Various types of output wave forms according to the input wave
- DC bias function
- DC output voltage monitor (3 1/2 digital meter)
|

AMS/AMT series | ±0.6kV to ±20kV |
30 to 60W |
- Output 600 V to ±10 kV
- High speed response 360 V/µsec (AMT series)
- All solid state
- Various types of output wave forms according to the input wave
- DC bias function
|

COR series | ±10kV |
20W |
- 3 functions of CC, CV and HV amplifier in one unit
- Four-quadrants output ±10kV, ±2mA
- Fast response of slew rate 30V/µs
- Return current terminal is standard and best for corona current control
|

ECA series | ±1 to ±10kV |
6W,30W |
- Specially designed for Electrostatic Chuck applications
- 2 output channels (1 kV to 5 kV model)
- Bi-polar output
- Built-in RF filter is available (option)
- Fast response with electronically polarity change (10 ms)
|

EC series | ±1 to ±10kV |
200W |
- Specially designed for Electrostatic Chuck applications
- 2 output channels
- Suitable for bi-polar system with just 1 unit
- Reversible output
- Smooth release of wafer with polarity reverse function
|

Xg series | 30 to 160kV |
15 to 1200W |
- For X-ray tube (both cathode ground type and anode ground type are available).
- Low ripple & high stability.
- Reverse polarity control.
- Integrated filament supply (floating AC for anode ground type).
- Constant Voltage/Current operation with full protection for safety operation.
- High voltage output: ±30 to ±160 kV and 15 to 4,000 W.
|

HEB/HIB series | -10kV -10kV -5kV 5V |
200µA 250µA 50µA 5A |
- Ultra Low Ripple
- High stability
- Low temperature coefficient
- Floating level : 4 ch PS programmable with Vmon and Imon for each PS
- Ground level : 1 ch PS programmable with Vmon and Imon
|

AK series | 2kV to 80kV |
2kW to 6.4kW |
- Wide range of output from 2kV to 80kV and 2kW to 6.4kW
- Low profile and lightweight
- Local and remote operation with various remote function
- Automatic protection against overload, short circuit and arc
- USB, RS-232C,RS-485 and GPIB interface is available and programable with optional units
|