J4/J6 series: high voltage power supply with exceptionally low ripple for photomultiplier tube
J4 series is an ultra low ripple high voltage power supply, specially designed for photomulitipliers (PMT). Output is spike noise free and will satisfy your requirements for PMT. Equipped with voltage monitor and local voltage control, J4/J6 can also be used as a high voltage power supply for radiation detectors such as phototubes, GM tubes, and proportional counter tubes. Two different interfaces are available for your preferences.
Its low noise brings you clear and stable signal. Without adding filters, you can get quite stable output. 2 form factors of connector type and card-edge type are available to meet your needs.
Main features
Possible applications
- Exceptional low ripple and high stability
- Remote & local programming
- Fully protected against continuous short circuit
- Optional output connector
- UL1950, TUV, CE certified
Possible applications
- Mass Spectrometer
- Mass Spectrograph
- Geiger Muller Tube (GM Tube)
- Microchannel Plate/Image Intensifier (MCP/II)
- Photomultiplier Tube (PMT)
- Nuclear Instruments
- Gas Chromatography
| Output | ||
|---|---|---|
| Voltage [kV] | Current [mA] | Ripple [mVp-p] |
| 0.5 | 8.0 | 5 |
| 1.0 | 4.0 | 2 |
| 1.5 | 2.5 | 2 |
| 2.0 | 2.0 | 2 |
| 3.0 | 1.0 | 3 |
| 5.0 | 0.5 | 10 |
