AMP: ultra high speed high voltage amplifier
AMP series is an ultra high speed high voltage amplifier. It realized as fast as 700 V/µs even with load, and approximately 2 times faster than existing models. With the capability of peak current output of 3 times. it suppress the distortion of waveform with capacitive load.
Its high frequency fast response of 60 kHz makes it possible to drive any desired waveform, including Sine, Triangle, Saw Tooth or Square waveforms, by just inputing the waveform using front panel BNC connector. Equipped with DC bias output and overcurrent protection.
Main features
Possible applications
- Output ±400V to ±20 kV
- High speed response 700 V/µsec(Change model to model)
- Peak current 6000 mA max (within 10 mArms)
- Various types of output wave forms according to the input wave
- DC bias function
- DC output voltage monitor (3 1/2 digital meter)
Possible applications
- Capillary Electrophoresis
- DNA Analysis
- Electron Beam
- Electrophoresis
- Electrophotography
- Electrostatic Chuck (E-Chuck)
- Electrostatic Deflection
- Focused Ion Beam (FIB)
- General Laboratory
- High Voltage Amplifier
- Insulation Test
- Ion Beam
- Ion Implanting
- Lithography
- Microchip Electrophoresis
| Output | ||
|---|---|---|
| Voltage[kV] | Current[mA] | Response[kHz] |
| 10.0 | 10 | 7 |
